The flagship of cycling Smart treadmills from CYCPLUS is just the trainer CYCPLUS T3 . It is a pure evolution of the already very good T2 trainer, which offers a much higher range of measured data and can also report other metrics.
The CYCPLUS T3 is equipped with a specially developed BLDC motor that is capable of providing up to 110 Nm of torque, measuring up to 2800 W and simulating 27% of the climb. In addition, the climb simulations are very realistic and thanks to its design, the T3 engine can provide even resistance even at low cadences.
The T3 BLDC engine is equipped with innovative cooling, which is provided by a special copper plate installed near the engine. During testing, it was confirmed that such a perfect cooling system allows you to manage a 17% climb simulation with a resistance of 48 Nm for 60 minutes. 14% climb with the resistance of the 40 Nm treadmill can go all day. CYCPLUS T3 can report data with very high accuracy, as opposed to T2, LEFT/RIGHT BALANCE measures, so it is able to show which leg was stronger during your training and as much percent. It is also possible to customize the treadmill through the application by your weight or set the treadmill completely according to your training preferences.
If you want to take the treadmill to a place where electricity does not reach, it will not be a problem either. The simulator can work even without connected power and generate energy for his operation during your driving.
Simulation of descent shifts the trainer CYCPLUS t3 to an even higher level, takes into account the wind speed, slope, terrain resistance and you preset data to make your driving experience as much as possible. CYCPLUS T3 uses standardized Bluetooth®, Ant+ and Fe-C communication protocols. Thanks to them, the simulator can easily connect to devices with different operating systems (PC, Mac, Android, iOS) and use the most popular applications such as Zwift or Roues. You can also connect the treadmill to different cyclopers and smart watches for an even greater training experience.
The stability of the simulator is taken care of by 4 hinged legs, which are also equipped with rubber damping blocks that allow the wheel fluctuations up to eight degrees on both sides.
The CYCPLUS T3 is compatible with the vast bike, including wheels with disc brakes, fixed axes and quick -releases. On the treadmill you can mount any cassette with a number of pinion 8-12, so you can make your trainer an accurate copy of your bike you use outside.
The weight of the CYCPLUS T3 is 19.4 kg, so it is equipped with a large handle, so even handling it will not be difficult.
BLDC Motor ensures realistic and perfect simulation of downhill and climb (up to 27%)
Very low noise
very high accuracy without the need for calibration
option to set up and customize according to your training preferences
can work without connection to electricity
sophisticated cooling system
Bluetooth®, Ant+ and FE-C
maximum power of 2800 W and maximum torque 110 nm
Left/Right Balance
4 hinged legs with damping silicone blocks
Realistic feeling of pedaling thanks to the swing to the sides (up to 8 °)
Compatibility with most bicycles
Possibility of cassette mounting in the range of 8-12 pinion
.png)
