Introducing our revolutionary tubeless sealant for road and gravel bikes – a high-performance sealant that keeps you rolling no matter what awaits you on the road or trail. Made from advanced synthetic latex and a matrix of biodegradable sealing particles, it seals holes up to 7 mm. Plus, it’s completely non-toxic and hypoallergenic, so your only worry will be smashing that KOM. Application is very simple: just squeeze the sealant through the Presta valve or add it directly into the tire, and thanks to our advanced polymer technology, the sealing compound bonds to the inner wall of the tire like armor, ready to fight the moment a puncture occurs. Seal it, pump it up, and ride full gas. Our tubeless sealant for road, gravel, and CX tires has your back.
Advanced synthetic latex-based, water-based sealant
Seals holes up to 7 mm
Ammonia-free – non-toxic
Zero natural latex
Biodegradable, mineral flakes and bamboo fiber particles quickly plug larger holes!
Free-flowing formula with advanced polymers helps the sealant coat the inner walls of the tire.
Lasts 3-6 months. (We recommend regularly checking the volume in the tire and topping up as needed (especially in hot, dry riding climates +35 °C) or every 750 km.)
Will not freeze down to -15 °C
Can be used with CO2**
Works up to 110psi
Instructions for use:
1. Before use, shake the pouch vigorously and turn it to ensure the particles are mixed. If possible, place the bike in a work stand. Remove the Presta valve core (if you have a non-removable valve core, simply pour directly into the unseated tire and reseat).
2. Make sure the pouch is thoroughly shaken just before filling. With the valve at the 12 o’clock position and using the non-drive side of the bike, press the pouch onto the valve and turn the valve to the 6 o’clock position. Squeeze in the desired amount and fold the pouch to the required fill line, reinsert the valve core, and inflate the tire according to the manufacturer’s recommendations.
3. Spin the wheel repeatedly, shake it side to side, and hey presto, you’re ready to rock 'n' roll! Regularly check the air in each tire and simply top up as needed.
4. Before adding our sealant to the tire, make sure you have thoroughly removed any previous sealant. If sealant gets on the frame, components, or clothing, remove it as quickly as possible with clean water and a cloth. Try to prevent the sealant from drying before you can properly wash your kit at home!
TIP! Ask Siri/Meta/Google or Alexa to add a reminder to your phone to check your tires and sealant in 3-6 months. *If you’re riding in hot conditions (+35 °C), simply top up as needed and check every few months.
When filling sealant into brand new tires, we recommend degreasing the inner surface of the tire to remove any oils or mold-release agents/residues from the tire manufacturing process. For best results, use our fast-drying degreaser, disc brake cleaner, or glue and sealant remover along with a clean cloth for effective cleaning. This process ensures maximum adhesion and effectiveness of the sealant.
HOW MUCH SEALANT DO I NEED?
Minimum amount per tire:
(to increase protection, add up to 20 ml extra)
Road tires
- 23c, 25c = 40ml-50ml
- 28c = 50ml-60ml
Gravel tires
- 30c - 45c = 70 - 80ml
Warnings:
Keep out of reach of children. Dispose of contents/container in accordance with local regulations. Avoid contact with eyes. Do not drink! PLEASE REFILL THIS POUCH USING OUR 1 LITRE REFILL – Refilling is much better than recycling! **We recommend applying CO2 from the top of the wheel/tire to avoid injecting directly into the sealant at the bottom.
.png)
